Some precautions when using Teppanyaki electric griddle

Why does the Teppanyaki grill keep heating up?

The first is due to the winding problem of the Teppanyaki electric griddle wire reel. In order to save copper wire, the wire spacing disc is deliberately wound or the technology is not in place, which will also lead to inconsistent sensing of the wire reel on the heating plane, resulting in uneven heating. .

The second reason for uneven heating is the heating surface of the Teppanyaki electric griddle - the thickness of the iron plate. The thickness of the hot plate in the ordinary configuration is only 1.0-1.5cm, and the thickness of the hot plate in the high configuration is 2.0-2.5cm. The thicker it is, the more uniform the heat conduction will be, but the corresponding price is the higher the cost.

Does the Teppanyaki electric griddle need to be equipped with a leakage protection switch?

The power cord of the Teppanyaki electric griddle is connected to the lower end of the leakage protection switch. The installation methods include guide rail installation and front panel installation. When installing a leakage protector, please pay attention to two points.

1. When a single-phase electric shock accident occurs to the human body (this type of accident has the highest probability of electric shock accidents), that is, when the load side of the leakage protector contacts a phase wire (live wire), it can play a very good protective role.

If the human body is insulated from the ground and touches one phase wire and one neutral wire, the leakage protector will not be able to protect it.

2. Since the role of the leakage protector is to prevent problems before they occur, its importance cannot be reflected when the circuit is working normally, and it is often not easy to attract everyone's attention.

Some people short-circuit or remove the leakage protector instead of carefully looking for the cause when the leakage protector operates. This is extremely dangerous and absolutely not allowed.